Home> Industry Information> How To Install And Remove The Faucet

How To Install And Remove The Faucet

February 09, 2023

How To Install And Remove The Faucet

How to install washbasin faucet?

1. Before installation, check whether the household faucet is intact. If damaged or deformed parts are found, replace them in time. Also pay attention to: practical faucet inlet and outlet do not connect the reverse, otherwise it will affect the normal use of water;
2. After the screw is tightened, the installation can be carried out. First, the water pipe is connected to the above water outlet;
3, then connect the water inlet pipe under the faucet; Finally, the two joints can be wrapped with raw material tape. It should be noted that: when connecting, attention should be paid to the tightness, to avoid the impact of water leakage.
Utility Faucet
4, if it is installed on the basin of the household faucet, then also need to use the Angle Valve, hose and other accessories to assist the installation:
5. First open the Angle valve switch and fix the nut (if there is no Angle valve, you can also directly tighten it by hand), and then insert the hose from the outlet into the triangle groove and tighten the nut with a wrench;
6. Then connect the water inlet pipe to the water hole under the basin and fix the nut to complete the installation of the practical faucet!
Household Faucet
How to disassemble the household faucet of washbasin?
1. Before removing the simple faucet, close the main tap water valve and other water equipment in the toilet (including water heater, washing machine, dishwasher). At the same time, disconnect the connecting lead between the power socket and the plug. Only then can the disassembly operation be carried out to avoid electric shock accident! In addition, it should be noted that the removed parts should be placed in a dry and ventilated place for preservation.
2. When disassembling, you can use a cross screwdriver or special tools to loosen the screws and remove the parts and clean them for use.
3. When you need to reassemble, be sure to assemble in the original order, so as not to affect the normal use.

The above is the How To Install And Remove The Faucet we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Send Inquiry

Home> Industry Information> How To Install And Remove The Faucet

Copyright © 2024 AIHUI Sanitary Ware All rights reserved. Privacy Policy

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send